TB 9-2320-302-13&P-2
DOOR CAM LATCH REPLACEMENT - CONTINUED
0014 00
REMOVAL
1.
Remove two cotter pins (10) and interior door handle
1,2
3,4,5
(9) from door latch (6). Discard cotter pins.
2.
Remove cotter pin (1), four washers (2), and cam con-
6
necting bar (7) from door latch (6). Discard cotter pin.
3.
Remove eight bolts (3), washers (5), lockwashers (4),
and two door latches (6) from door assembly (8). Dis-
7
card lockwashers.
8
9
10
6
440-022
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
INSTALLATION
1.
Install two door latches (6), eight new lockwashers (4), washers (5), and bolts (3) on door assembly (8).
2.
Install cam connecting bar (7), four washers (2), and new cotter pin (1) on door latch (6).
3.
Install door handle (9) and two new cotter pins (10) on door latch (6).
4.
Verify correct operation of door assembly (WP 0004 00).
END OF WORK PACKAGE
0014 00-2