TB 9-2320-302-13&P-1
DOOR HANDLE REPLACEMENT - CONTINUED
0013 00
REMOVAL - CONTINUED
4.
Disconnect interior handle rod (9) from exterior handle assembly (11).
5.
Disconnect exterior handle rod (14) from exterior handle assembly (11) and from door latch (15).
6.
Disconnect lock rod (10) from exterior handle assembly (11).
7.
Remove three nuts (12), bolts (13), and exterior handle assembly (11) from door (4).
15
9
14
4
12,13
10
11
417-262
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
INSTALLATION
1.
Install exterior handle assembly (11), three bolts (13), and nuts (12) on door assembly (4).
2.
Connect lock rod (10) on exterior handle assembly (11).
3.
Connect exterior handle rod (14) to exterior handle assembly (11) and to door latch (15).
4.
Connect interior handle rod (9) to exterior handle assembly (11).
5.
Connect lock rod (10) and interior handle rod (9) on interior handle assembly (7).
6.
Install interior handle assembly (7), three screws (6), and screw (8) on door assembly (4).
7.
Install door panel (3), lower panel (5), eight washers (1), and screws (2) on door assembly (4).
8.
Check alignment of door latch (WP 0016 00).
END OF WORK PACKAGE
0013 00-3/(0013 00-4 Blank)