TB 9-2320-279-13&P-4
0068
18 19
LIFTING
DEVICE
21
20
17
Figure 10.
6. Lightly lubricate preformed packing (16) with clean oil and install preformed packing (16) and counterbalance
valve block (14) on winch motor (17) with four screws (15). Tighten screws to 53 lb-ft (72 Nm).
9
10
11
12 13
14 16
15
17
Figure 11.
7. Lightly lubricate preformed packing (13) with clean oil and install preformed packing (13) and fitting (12) on
counterbalance valve block (14) with two clamp halves (11), four lockwashers (10), and screws (9).
NOTE
Install cable ties as required.
8. Install hose (7) on fitting (8).