TB 9-2320-279-13&P-4
0064
NOTE
Tag and mark wires prior to removal to ensure proper installation.
Remove cable ties as required.
2. Remove four nuts (5), lockwashers (6), screws (7), wire 1435 (8), two wires 1435 (9), receptacle cover (10), and
connector MC43 (11) from trailer connector plate (3). Discard lockwashers.
10
PAINT REMOVED
FOR GROUNDING
11
9
8
3
5
6
7
Figure 2.
END OF TASK
INSTALLATION
NOTE
To ensure good electrical grounding, remove paint in a 1 in. (2.5 cm) diameter area around one
connector mounting hole.
Install cable ties as required.
1. Install connector MC43 (11), receptacle cover (10), two wires 1435 (9), wire 1435 (8) on trailer connector plate
(3) with four lockwashers (6), screws (7), and nuts (5).