TB 9-2320-279-13&P-4
0053
4. With the aid of an assistant and lifting device, remove two locknuts (10), screws (11), roller supports (4) and (5),
and roller assembly (1) from rear crossmember (6), and frame (9). Discard locknuts.
5. Remove two grease fittings (12) from two roller supports (4) and (5).
6. Remove lifting device from roller assembly (1).
END OF TASK
INSTALLATION
1. Install two grease fittings (12) on two roller supports (4) and (5).
12
5
LIFTING DEVICE
3
12
10
7
1
2
4
9
9
6
2
11
6
3
8
Figure 2.
2. Lubricate inside surface of two roller supports (4) and (5) with GAA. (WP 0041)
3. Install lifting device on roller assembly (1).
