TB 9-2320-279-13&P-4
0033
TEST 20 - Does winch operate with remote control?
CAUTION
Do not let cable end run into heavy-duty winch while reeling IN, or damage to equipment
will result.
1. If disconnected, connect heavy-duty winch remote control unit harness internal four terminal connector. (WP
2. If removed, install cover on heavy-duty winch remote control unit and tighten four screws. (WP 0047)
3. If disconnected, connect heavy-duty winch control valve harness IN solenoid connector. (WP 0049)
4. If disconnected, connect heavy-duty winch control valve harness OUT solenoid connector. (WP 0049)
5. If disconnected, connect remote control cable to remote control connector. (WP 0015)
6. If disconnected, connect heavy-duty winch remote control unit to remote control cable. (WP 0015)
WARNING
Excessive noise levels are present any time the heavy-duty winch, crane, or retrieval system
is operating. Wear single hearing protection (earplugs or equivalent) while working around
equipment when it is running. Failure to comply may result in injury or death to personnel.
Seek medical aid should you suspect a hearing problem.
7. Start engine (refer to TM 9-2320-279-10).
8. Set PTO ENGAGE switch to ON position. (WP 0015)
9. Prepare vehicle for heavy-duty winch operation. (WP 0015)
0033-31
