TB 9-2320-279-13&P-4
0033
DECISION
No - Replace heavy-duty winch control valve harness. (WP 0049)Test 20 - Does winch operate with remote
control?
Yes - Repair wire 1435 (refer to TM 9-2320-315-14&P).Test 20 - Does winch operate with remote control?
TEST 8 - Is continuity measured on heavy-duty winch control valve harness wire 1682?
WARNING
Ensure electrical power is off prior to working on all electrical connections. Failure to comply
may result in injury or death to personnel.
Remove all jewelry such as rings, ID tags, bracelets, etc. prior to working on or around
vehicle. Jewelry and tools can catch on equipment, contact positive electrical circuits, and
cause a direct short, severe burns, or electrical shock. Failure to comply may result in injury
or death to personnel.
1. Disconnect heavy-duty winch control valve harness OUT solenoid connector. (WP 0049)
2. Set multimeter switch to ohms.
3. Connect positive (+) probe of multimeter to wire 1682 at heavy-duty winch control valve harness connector
remote control connector, terminal B. Refer to schematics.
0033-11
