TB 9-2320-279-13&P-4
FIELD MAINTENANCE
CABLE HOLD DOWN DOES NOT OPERATE
INITIAL SETUP:
Tools and Special Tools
Parking brake applied (refer to TM 9-2320-279-10).
Tool Kit, General Mechanic's: Automotive (WP
Wheels chocked (refer to TM 9-2320-279-10).
0081, Table 2, Item 5)
Gloves, Welders (WP 0081, Table 2, Item 7)
Goggles, Industrial (WP 0081, Table 2, Item 7)
Personnel Required
Wheeled Vehicle Mechanic 63B (2)
Equipment Condition
Engine OFF (refer to TM 9-2320-279-10).
TROUBLESHOOTING PROCEDURE
CABLE HOLD DOWN DOES NOT OPERATE
TEST 1 - Is air pressure present on air line 2338 at winch hold down control valve?
WARNING
If air lines are under pressure when they are disconnected, they can whip around. Use care
when loosening or disconnecting air line fittings. Failure to comply may result in injury or
death to personnel.
WARNING
Wear proper eye protection when performing leakage tests or disconnecting air lines that
may be under pressure. Failure to comply may result in injury or death to personnel.
1. Pull heavy-duty winch control station CABLE HOLD DOWN control valve out to DISENGAGE position. (WP
2. Pull heavy-duty winch control station WINCH KICKOUT control valve out to DISENGAGE position. (WP 0010)
0028-1