TB 9-2320-279-13&P-4
0017
(e) The service brake pedal (2) may need to be applied slightly earlier than normal when stopping the
vehicle.
(f) Depending upon gear range the transmission is locked into and the terrain the vehicle is operating
in, the engine and/or transmission may overheat. The operator must closely monitor the engine
WATER TEMP gauge (4) and the TRANS TEMP gauge (5).
CAUTION
If overheating occurs when operating in the transmission limp home mode, the operator
should stop the vehicle (do not shut off engine), and allow the transmission and engine to
cool down to normal operating levels. If the engine and transmission do not cool down, or
overheating reoccurs, the operator should shut off engine and notify field level maintenance.
Failure to comply may result in damage to equipment.
(g) Notify field level maintenance as soon as possible.
END OF TASK
END OF WORK PACKAGE
0017-3/(4 blank)
