TB 9-2320-279-13&P-4
0014
11
10
8
13
12
Figure 5.
12. Connect remote-control unit cable plug (11) to remote-control unit hookup receptacle (10).
13. Clean any dirt and debris from both remote-control unit receptacle (12) and remote-control unit cable plug (13).
14. Connect remote-control unit cable plug (13) to remote-control unit receptacle (12).
PAY OUT CABLE AND CONNECT TO EQUIPMENT
CAUTION
Do not allow other vehicles to run over winch cable. Winch cable may be damaged.
Failure to comply may result in damage to equipment.
Cable Hold Down control should never be engaged (pushed in) during winch cable pay
out under power. Failure to comply may result in damage to equipment.
1. Disengage (pull out) Cable Hold Down control (1).