TB 9-2320-279-13&P-2
DOOR BALLISTIC GLASS REPLACEMENT - MODEL B - CONTINUED
0014 01
REMOVAL - CONTINUED
5
9
6,7,8
10
440-054
15,16 14 11,12,13
18,19
21
4
17
20
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
INSTALLATION
1.
Install 10 rollers (17), washers (16), and nuts (15) on supports (5 and 14).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Failure to follow this warning may cause injury or death to personnel.
For proper threat protection, ballistic glass must be correctly installed onto frame. During installation,
ensure that decal marking "INSTALL THIS SURFACE TOWARDS THREAT" is located on outside of
cab. Improperly installed ballistic glass will not protect occupants. Failure to follow this warning may
cause injury or death to personnel.
CAU T I ON
Use caution when handling ballistic glass.
2.
With assistance, install ballistic glass (10) in ballistic glass frame (4).
3.
Install two ballistic glass frames (21), 18 washers (19), bolts (18), and new locknuts (20) on ballistic glass (10).
0014 01-3
Change 1