TB 9-2320-279-13&P-2
DOOR BALLISTIC GLASS AND FRAME ASSEMBLY REPLACEMENT - CONTINUED
0014 00
REMOVAL - CONTINUED
6.
Remove two locknuts (37), washers (38), capscrews (53), washers (54), and sleeves (39) from door (40). Discard lock-
nuts.
7.
Remove seven remaining locknuts (9), washers (10), bolts (11), washers (12), and two doublers (57) from retainer (17).
Discard locknuts.
8.
Remove six locknuts (35), washers (36), bolts (55), washers (56), and lift bracket (28) from door (40). Discard locknuts.
9.
Remove locknut (29), washer (30), lift bracket (28), bolt (13), and washer (14) from retainer (17). Discard locknut.
WARN I N G
The following step will release the retainer and supports from the door. Use assistance to support compo-
nents while removing the attaching hardware. Failure to follow this warning may cause injury to personnel.
10.
With assistance, remove three locknuts (33), washers (34), bolts (15), washers (16), retainer (17), support (22), and sup-
port (44) from door (40). Discard locknuts.
11.
Remove three bolts (26), washers (27), and doubler (23) from support (22).
12.
Remove bolt (47) and washer (48) from support (44).
13.
Remove two capscrews (50), washers (51), handle (52), and doubler (49) from support (44).
14.
Remove eight locknuts (18), washers (19), screws (21), and four ramps (20) from retainer (17). Discard locknuts.
15.
Remove locknut (45), washer (46), capscrew (41), spacer (42), and guide (43) from support (44). Discard locknut.
16.
Remove four locknuts (31), washers (32), screws (24) and two ramps (25) from door (40). Discard locknuts.
29,30
28
24
26,27
25
31,32
33
34
28
22
23
9
10
35
36
37
21
17
19
16
20
38
18
15
39
14
40
13
41,42
43
44
57
46
45
52
56
51
55
11
12
48
49
53
54
47
417-131
50
0014 00-4