TM 9-2320-302-34
0081 00-2
REAR-REAR AXLE DIFFERENTIAL CARRIER REPLACEMENT - CONTINUED
0081 00
REMOVAL - CONTINUED
WARNING
Rear-rear differential carrier weighs 860 lb (390 kg). Support with suitable floor jack prior to removal to pre-
vent injury to personnel.
1.
Remove 12 screws (1 and 2) and flat washers (3 and 4).
2.
Loosen differential carrier (5) by tapping around flange.
3.
Remove differential carrier (5) from axle (6).
4.
Lower differential carrier (5) onto floor jack and roll differential carrier from under vehicle.
INSTALLATION
WARNING
Rear-rear differential carrier weighs 860 lb (390 kg). Support with suitable floor jack prior to installation to
prevent injury to personnel.
NOTE
If axle assembly has been removed from vehicle, perform steps 3 through 5 only.
1.
Position differential carrier (5) on floor jack and roll differential carrier into position under vehicle.
1,3
2,4
6
5
2,4
2,4
2,4