TM 9-2320-302-34
0082 00-2
REAR-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0082 00
DISASSEMBLY - CONTINUED
1.
Install differential carrier (1) on repair stand.
2.
Turn differential carrier (1) so ring gear (2) is up.
NOTE
If reinstalling same ring gear and drive pinion, perform steps 3 through 5 to measure backlash.
3.
Move ring gear (2) so ring gear teeth fully engage with drive pinion (3).
4.
Install dial indicator on flange of differential carrier (1) so that tip of indicator is against drive side of tooth on ring gear
(2). Adjust dial indicator to zero.
5.
Rotate ring gear (2) in both directions and record reading.
6.
Repeat step 5 two more times in different locations.
1
2
1
3