TM 9-2320-302-10
0005 00-19
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
OPERATE LIGHTS
NOTE
If engine is not running, ignition switch must be in ON position for lights to
operate.
1.
Operate Strobe Light.
a.
Turn ignition on and main light switch to STOP LIGHT.
b.
Move strobe light switch up to turn on strobe light (1). STR LT indicator (2) should
come on.
c.
Move strobe light switch down. STR LT indicator (2) should go off.
d.
Place ignition key in OFF position.
2.
Operate Work Lights.
a.
Connect work light plug into receptacle (3) on either side of cab or dash.
b.
Place ignition key in ON position and main light switch in STOP LIGHT or SER
DRIVE position.
c.
Position ignition key in OFF position and disconnect work light plug from recepta-
cle (3).
1
2