TM 9-2320-302-10
0005 00-22
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
RIFLE MOUNTING KIT
The rifle mounting kit (1) is located next to shift tower.
OPERATE HEATER AND DEFROSTER
NOTE
Heater and defroster obtain heat from engine as it runs. If engine is not run-
ning, heat will not be available for these functions.
1.
Start engine and bring truck to normal operating temperature.
2.
Slide mode control lever (2) to desired position.
3.
Slide temperature control lever (3) to desired temperature range.
4.
Rotate fan switch (1) to adjust fan speed from slower to faster, as desired.
5.
Press FRESH/RECIRC air button (4) to desired setting.
1
1
2
3
4