TM 9-2320-302-10
0005 00-24
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
PREPARATION FOR TRANSPORT - CONTINUED
1.
Remove two retaining pins (1), flat washers (2), and straight pins (3) from front bumper
(4).
2.
Position bumper extension (6) in front bumper (4) so straight pins (3) will engage two
inside adjustment holes (5) on bumper extension.
3.
Install two straight pins (3), flatwashers (2), and retaining pins (1) in front bumper (4).
4.
To lift vehicle, attach suitable lifting device to lifting shackles and bumper extensions.
Lift vehicle slowly and have observers watch for any signs of cable failure, unusual load
shifts, and obstructions.
5.
During transport, secure vehicle by attaching cables to tiedown points.
OPERATE TILTABLE HOOD
1.
Open Tiltable Hood.
a.
Unlock hood retaining strap (3) from hood locking bracket (4).
b.
Repeat step (1) for opposite side.
c.
Grasp hand slot (1) at top-front center of hood (2) and rotate hood to open position.
2
3
4
5
6
1