A/C COMPRESSOR SUBSYSTEM REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Remove compressor (25) and two hoses (6 and 12) from vehicle as an assembly.
CAU T I ON
· Do not disconnect hose at receiver/dryer or compressor. Disconnecting hose at receiver/dryer or compressor
will cause loss of refrigerant (R-134a). Close and disconnect shut off valves under hood before removing any
· System will be charged before installation in vehicle.
N OT E
· Install cushion clamps and screws as marked during REMOVAL.
· Install plastic ties as required.
Route hose (6) and shutoff valve (3) from compressor to shutoff valve (4).
Lightly coat new #8 O-ring (5) with refrigerant compressor oil.
Install #8 O-ring (5) and shutoff valve (3) to shutoff valve (4).