TB 9-2320-360-13&P-1
A/C CONDENSER SUBSYSTEM REPLACEMENT - CONTINUED
0035 00
REMOVAL
CAU T I ON
Do not disconnect hoses at receiver/dryer. Disconnecting hose at receiver/dryer will cause loss of refrigerant
(R-134a). Close and disconnect shutoff valves under hood before removing any A/C components.
System will be charged when removed from vehicle.
N OT E
Mark location and cut plastic ties as required.
Cap and plug all lines and fittings.
1.
Remove two caps (1 and 2) and close two shutoff valves (3 and 4).
2.
Remove shutoff valve (3), #8 O-ring (5), and hose (6) from shutoff valve (4). Discard O-ring.
3.
Remove screw (7), washer (8), locknut (9), and cushion clamp (10). Discard locknut.
N OT E
Tag and mark all wires prior to removal.
4.
Disconnect A/C binary switch connector (11).
5.
Disconnect A/C high pressure switch connector (12).
HETF00404
0035 00-2