TM 9-2320-363-34-2
14.
15.
16.
REMOVE AND DISCARD SEAL (20) FROM VALVE HOUSING (21).
USING FINE EMERY CLOTH, REMOVE PAINT OR CORROSION FROM INPUT SHAFT (3).
USING TORX SOCKET, REMOVE FOUR TORX-HEAD SCREWS (22), VALVE HOUSING (21), INPUT
SHAFT (3), AND RACK PISTON (23) AS AN ASSEMBLY. REMOVE AND DISCARD PACKINGS (24
AND 25).
C A U T I O N
Position rack piston so that return cap faces up during removal. Failure to do
so could result in loss of one or more balls of 32-ball set. If any balls are
lost or damaged, balls must be replaced as a set.
17. USING TORX SOCKET, REMOVE TWO SCREWS (26), RETURN CAP (27), AND SEAL (28) FROM
RACK PISTON (23). DISCARD SCREWS AND SEAL.
19-13
