TM 9-2320-363-34-2
10.
11.
12.
13.
ATTACH LIFTING DEVICE TO RING GEAR SUBASSEMBLY (10).
NOTE
Ring gear and assembled parts must be tilted to clear casting inside carrier.
REMOVE RING GEAR SUBASSEMBLY (10) AND TWO BEARING CUPS (11).
PLACE RING GEAR SUBASSEMBLY (10) ON CLEAN WORK SURFACE AND REMOVE LIFTING
DEVICE.
REMOVE TWO BEARING CONES (12).
14.
REMOVE 12 NUTS (13), 12 WASHERS (14), AND 12 BOLTS (15) FROM RING GEAR (2).
W A R N I N G
Ring gear is heavy and can injure personnel if dropped. Do not put hands
under ring gear.
15.
REMOVE RING GEAR (2) FROM RING GEAR SUBASSEMBLY (10).
17-51
