TM 9-2320-363-34-2
NOTE
Coat all bearing cones and bearing cups with axle oil prior to installation.
7.
USING
INNER
PRESS, INSTALL INNER BEARING CONE (1) ON DRIVE PINION (2) UNTIL BOTTOM OF
BEARING CONE (1) TOUCHES BOTTOM OF DRIVE PINION (2).
8.
INSTALL DIFFERENTIAL CARRIER (3) ON PRESS WITH LEGS OF DIFFERENTIAL CARRIER (3)
TOWARD TOP OF PRESS.
NOTE
If installing new ring gear and drive pinion, use shim pack thickness determined
in step 5 or 6. If installing same ring gear and drive pinion, use shim pack
removed in Disassembly step 48.
9.
INSTALL SHIM PACK (4). USING PRESS, INSTALL INNER BEARING CUP (5) IN DIFFERENTIAL
CARRIER (3) UNTIL BOTTOM OF INNER BEARING CUP (5) TOUCHES SHIM PACK (4).
17-19
