TM 9-2320-363-34-2
C A U T I O N
Square head of screw must be seated in machined groove of ring gear to
prevent damage to ring gear or screws.
3.
INSTALL RING GEAR (5) ON DIFFERENTIAL CASE FLANGED HALF (2) WITH 12 SCREWS (6), 12
WASHERS (7), AND 12 NEW LOCK NUTS (8). TIGHTEN LOCK NUTS TO 180-220 LB-FT (224-298
N.m).
4.
INSTALL INNER BEARING CUP (9) IN BEARING CAGE (10).
16-11