TM 9-2320-363-34-2
TORQUE CONVERTER PUMP REPLACEMENT AND REPAIR (CONT)
3.
PLACE DRIVER HANDLE (6) OVER BEARING INSTALLER (3).
4.
DRIVE BEARING (5) DOWN UNTIL SEATED.
5.
REMOVE DRIVER HANDLE (6) AND BEARING INSTALLER (3).
6.
INSTALL SPACER (7) OVER GROUND SLEEVE (4) ON PUMP (1).
7.
INSTALL RETAINING RING (8) ON GROUND SLEEVE (4).
8.
COAT PUMP (1) HUB AND HUB AREA (9) WITH LUBRICATING OIL.
NOTE
Follow-on Maintenance:
Install torque converter stator (page 14-22).
14-34
