TM 9-2320-363-34-2
TORQUE CONVERTER PUMP REPLACEMENT AND REPAIR (CONT)
8.
INSTALL 6 NEW LOCKING STRIPS (9) AND 12 SCREWS (10) AND TIGHTEN SCREWS TO 35-40
LB-FT (47-54 N.m).
9.
BEND CORNERS OF 6 LOCKING STRIPS (9) AGAINST HEADS OF 12 SCREWS (10).
NOTE
Keep seal ring sealed in package until ready to use so seal ring does not
change shape.
10. ROLL NEW SEAL RING (11) TO ONE-HALF LENGTH AND HOLD FOR AT LEAST 10 SECONDS.
11. INSTALL SEAL RING (11) IN GROOVE ON HUB (2).
14-32
