TM 9-2320-363-34-2
AIR COMPRESSOR REPAIR (CONT)
4.
POSITION AIR COMPRESSOR FLANGE (3) FACE DOWN ON PRESS BED.
5.
POSITION CRANKSHAFT FRONT SLEEVE BEARING (4) IN BORE OF AIR COMPRESSOR FLANGE
(3) WITH SLOT IN FRONT SLEEVE BEARING (4) PERPENDICULAR TO CRANKSHAFT VERTICAL
CENTERLINE.
6.
PRESS CRANKSHAFT FRONT SLEEVE BEARING (4) IN BORE OF AIR COMPRESSOR FLANGE (3)
FLUSH WITH MACHINED SURFACE.
NOTE
Oil groove side of crankshaft front thrust washer should be positioned toward
crankshaft shoulders.
-7.
COAT SMOOTH SIDE OF CRANKSHAFT FRONT THRUST WASHER (5) WITH THIN FILM OF
CLEAN ENGINE LUBRICATING OIL AND POSITION FRONT THRUST WASHER (5) IN MACHINED
SEAT INSIDE FRONT OF AIR COMPRESSOR BODY (6). ENGAGE TANG (7) IN PASSAGE ABOVE
BORE IN AIR COMPRESSOR BODY (6).
12-128
