TM 92320-363-34-1
2.
REMOVE THE FASTENERS ATTACHING THE CONDENSER (2) TO THE RADIATOR, AND
REMOVE THE CONDENSER.
1.
2.
3.
4.
PLACE THE CONDENSER (2) ON THE
RADIATOR. INSTALL AND TIGHTEN
THE FASTENERS 108 LB-IN (1220
N.cm).
REMOVE THE PLUGS FROM THE REFRIGERANT LINES (1) AND THE CONDENSER (2).
INSTALL NEW PREFORMED PACKINGS AND APPLY REFRIGERANT OIL TO THEM. APPLY
LOCTITE 242 TO THE MALE FITTING THREADS AND CONNECT THE REFRIGERANT LINES
TO THE CONDENSER. USING TWO WRENCHES TO AVOID TWISTING THE TUBING, TIGHTEN
THE CONNECTIONS TO THE VALUES IN TABLE D-3, APPENDIX D.
NOTE
Any time air conditioning system refrigerant is evacuated, replace receiver-drier.
REPLACE RECEIVER-DRIER (page 11.1-14).
SERVICE AIR CONDITIONER COMPRESSOR (page 11.1-23).
NOTE
Follow-on Maintenance:
Charge and leak test air conditioning system (page 11.1-2 and TM 9-2320-363-20).
Check operation of air conditioning system (TM 9-2320-363-10).
Change 1
11.1-17
