TM 9-2320-363-34-1
Table 3-1. Troubleshooting (Cont)
Malfunction
Test or Inspection
Corrective Action
STEERING (CONT)
6. HIGH STEERING EFFORT IN BOTH DIRECTIONS.
Step 1. Disconnect lower steering column from steering gear and check both upper
and lower columns for binding.
l Replace defective column or universal joint (TM 9-2320-363-20).
Step 2. Disconnect steering gear pitman arm and check front end components for
binding.
l Replace defective components (TM 9-2320-363-20).
Step 3. Check for sufficient pump pressure (Malfunction 2, step 2).
l If pressure is less than 900 psi (621 kPa), repair (page 19-2)
or replace power steering pump (page 7-2).
Step 4. Check for sufficient pump flow (Malfunction 2, step 3).
l Repair (page 19-2) or replace power steering pump (page 7-2).
HYDRAULIC WINCH (M916A1 AND M916A2)
1. NO OR LOW OIL FLOW FROM PUMP.
Check for broken input shaft and internal parts.
l Repair (page 23-12) or replace winch hydraulic pump
(page 11-2).
2. EXTERNAL LEAKS.
Check for damaged packings.
l Replace damaged packings (pages 23-9, 23-12).
3. DELIVERS LESS THAN OR NO RATED PULL.
2-24
Change 1
