TM 9-2320-363-34-1
OVERHEAD CAB WIRING HARNESS REPLACEMENT
This task covers:
a. Removal b. Cleaning
c. Inspection d. Installation
Tools and Special Equipment:
Shop Equipment, SC 4910-95-CL-A31
Tool Kit, SC 5180-90-CL-N05
References:
TM 9-2320-363-20
Equipment Condition:
Reference
Condition Description
TM 9-2320-363-20
Head Liners Removed
TM 9-2320-363-20
Batteries Disconnected
NOTE
l
Wiring harness and leads are secured in place by clips and screw terminals.
l
Only remove hardware securing harness or lead to be removed.
l
M917A1 and M917A1 w/MCS have no utility lights. Item 4 is not included in M917A1 and
M917A1 w/MCS wiring harness.
DISCONNECT AND REMOVE OVERHEAD CAB WIRING HARNESS USING ILLUSTRATION AND
TABLE AS A GUIDE.
Use general cleaning methods to clean all parts (page 2-30).
Inspect all parts for wear or damage.
NOTE
l
Wiring harness and leads are secured in place by clips and screw terminals.
l
Make sure harness is secure and all hardware is tight.
l
M917A1 and M917A1 w/MCS have no utility lights. Item 4 is not included in M917A1 and
M917A1 w/MCS wiring harness.
INSTALL AND CONNECT OVERHEAD CAB WIRING HARNESS USING ILLUSTRATION AND
TABLE AS A GUIDE.
N O T E
Follow-on Maintenance:
Connect batteries (TM 9-2320-363-20).
4-36
Change 1
