TM 9-2320-363-34-1
NOTE
Perform steps 3.1 and 3.2 for all except M915A2 and M916A1.
3.1
INSTALL 9-PIN DATA LOGGER CONNECTOR (14.3) AND 6-PIN DIAGNOSTIC CONNECTOR
(14.2) WITH EIGHT SCREWS (14.1).
3.2
CONNECT 2-PIN MALE CONNECTOR (6.1).
4.
CONNECT THREE RING TERMINALS (6), 6-PIN FEMALE CONNECTOR (9), TWO 3-PIN FEMALE
CONNECTORS (11), 1-PIN MALE CONNECTOR (12), 1-PIN FEMALE CONNECTOR (13), 12-PIN
DIAGNOSTIC CONNECTOR (14), 3-PIN MALE CONNECTOR (15), TWO 2-PIN CONNECTORS
(16), AND 2-PIN FEMALE CONNECTOR (17).
Change 1
4-31