TM 9-2320-363-34-1
TURN SIGNAL (THRU-DECK) WIRING HARNESS REPLACEMENT
This task covers:
a. Removal b. Cleaning c. Inspection d. Installation
Tools and Special Equipment:
Equipment Condition:
Tool Kit, SC 5180-90-CL-N05
Reference
Condition Description
References:
TM 9-2320-363-20
Batteries Disconnected
TM 9-2320-363-20
Procedure is the same for both
Wiring harness and leads are
clamps, and screw terminals.
Only remove hardware securing
NOTE
wiring harnesses.
secured in place by clips, wire ties, cushion
harness or lead to be removed.
DISCONNECT AND REMOVE TURN SIGNAL (THRU-DECK) WIRING
ILLUSTRATION AND TABLE AS A GUIDE.
Use general cleaning methods to clean all parts (page 2-30).
HARNESS USING
Inspect all parts for wear or damage.
4-14