TM 9-2320-363-34-1
TURN SIGNAL/MARKER LIGHT WIRING HARNESS REPLACEMENT
This task covers:
a. Removal b. Cleaning c. Inspection d. Installation
Tools and Special Equipment:
Equipment Condition:
Tool Kit, SC 5180-90-CL-N05
Reference
Condition Description
References:
TM 9-2320-363-20
Batteries Disconnected
TM 9-2320-363-20
NOTE
Procedure is the same for both wiring harnesses.
Wiring harness and leads are secured in place by clips, wire ties, cushion
clamps, and screw terminals.
Only remove hardware securing harness or lead to be removed.
DISCONNECT AND REMOVE TURN SIGNAL/MARKER LIGHT WIRING HARNESS USING
ILLUSTRATION AND TABLE AS A GUIDE.
Use general cleaning methods to clean all parts (page 2-30).
Inspect all parts for wear or damage.
4-12
