TM 9-2320-363-34-1
TRANSFER CASE MOUNTS REPLACEMENT
This task covers:
a. Removal b. Cleaning c. Inspection d. Installation
INITIAL SETUP
Applicable Configuration:
Materials/Parts:
All except M915A2
Loctite 510
Appendix B, Item 34.1
Tools and Special Equipment:
Equipment Description:
Tool Kit, SC 5180-90-CL-N05
Reference
Condition Description
Personnel Required: (2)
Page 3-263
Transfer Case Removed
NOTE
Perform steps 1 thru 4 to remove transfer case mount from left frame rail.
1.
REMOVE TWO NUTS (1), FOUR WASHERS (2) TWO CAPSCREWS (3) AND TWO WASHERS
(4) FROM LOWER BRACKET (5).
2.
REMOVE LOWER BRACKET (5) AND FOUR RUBBER MOUNTS (6) FROM UPPER BRACKET (7).
NOTE
l
Perform step 3 for M916A1 and M916A2.
l
Note position of screws for installation.
3.
REMOVE SIX NUTS (8) TEN WASHERS (9) TWO FLAT HEAD SCREWS (10), FOUR
CAPSCREWS (11) AND UPPER BRACKET (7) FROM LEFT FRAME RAIL (12).
NOTE
l
Perform step 4 for M917A1 and M917A1 w/MCS.
l
Note position of capscrews for installation.
4.
REMOVE SEVEN NUTS (8) AND CAPSCREWS (11), 14 WASHERS (9) AND UPPER BRACKET
(7) FROM LEFT FRAME RAIL (12).
3-269.0
Change 1
