TM 9-2320-363-34-1
4.
ON M917A1 AND M917A1 W/MCS, DISCONNECT CTIS WIRING HARNESS CONNECTORS (9.3)
FROM SPEED SENSOR CONNECTORS (9.4). IF A NEW TRANSFER CASE IS TO BE INSTALLED,
REMOVE SPEED SENSOR (9.5) AND INSTALL ON NEW TRANSFER CASE.
5.
REMOVE SEVEN FASTENERS (10),
CLAMP (11), AND DUST COVER (12).
6.
REMOVE COTTER PIN (13) AND PIN
(14) AND DISCONNECT CLEVIS (15).
DISCARD COTTER PIN.
7.
REMOVE TWO CAPSCREWS (16) AND
TWO LOCK WASHERS (17) AND SET
BRACKET (18) ASIDE. DISCARD LOCK
WASHERS.
N O T E
Tag air lines prior to removal to aid
in installation.
8.
DISCONNECT TWO AIR LINES (19)
FROM SHIFT CHAMBER (20).
9.
REMOVE BOLT (21) AND WASHER (22)
AND SET BRACKET (23) ASIDE.
Change 1
3-265
