TM 9-2320-363-34-1
CYLINDER HEAD REPLACEMENT (CONT)
8.
9.
10.
11.
REMOVE LIFTING DEVICE.
NOTE
If cylinder head other than one removed, or if resurfaced cylinder head is being
installed, three nuts retaining adjustable idler gear (page 12-99) must be
loosened before installing and tightening camshaft drive gear retaining bolt. Notify
general support maintenance to perform adjustment.
REMOVE THREE BOLTS (10 AND 11) AND LIFTER (9).
LUBRICATE THREADS 0F 38 CYLINDER HEAD BOLTS AND BOLT-HEAD CONTACT AREAS WITH
SMALL AMOUNT OF INTERNATIONAL COMPOUND NO. 2.
INSTALL 38 W ASHERS (16) ON 38 BOLTS (17) AND INSTALL 38 BOLTS (17) IN CYLINDER HEAD
(6).
3-88
