TM 9-2320-363-34-1
WARNING
Cylinder head weighs 421 lb (191 kq). Use suitable Iifting device to lift and
support cylinder head. Failure to do so could result in injury to personnel.
Make sure lifting device is securely fastened and weight being lifted does not
exceed capacity of lifting device. Failure to do so may cause personal injury.
NOTE
Make sure diamond shaped seal (12) is fully seated in groove.
6.
ATTACH SUITABLE LIFTING DEVICE TO LIFTER EYE (13) AND INSTALL CYLINDER HEAD (6).
7.
SEAT CYLINDER HEAD (6) ON DIAMOND DOWEL (14) AND ROUND DOWEL (15) UNTIL FULL
CONTACT IS MADE WITH CYLINDER HEAD GASKET (3).
3-87
