TM 9-2320-363-10
3-11.
REAR WHEEL AND TIRE ASSEMBLY REPLACEMENT
(M917A1 AND M917A1 W/MCS) (Con’t).
Hydraulic jack is intended only for lifting truck, not for
supporting vehicle to perform maintenance. Do not get
under truck after it is raised unless it is properly sup-
ported with blocks or jackstands. Failure to observe this
warning may result in death or injury to personnel.
(10)
Raise jack until tires clear ground. Use caution when lifting or
handling wheel and tire assembly. It is heavy and could cause injury if improperly
lifted or if it falls on you.
(11)
Remove outer tire wheel nuts and wheel and tire assembly.
(12)
If replacing inner rear tire, remove spacer, wheel nuts, and
wheel and tire assembly. Remove hose (15) from valve stem (18).
ensuring
b.
Install Rear Wheel and Tire Assembly.
(1)
Obtain a deflated replacement wheel and
valve stem cap and valve stem core are removed.
3-34
tire assembly
