TM 9-2320-363-10
Section II. TROUBLESHOOTING PROCEDURES
Paragraph
Number
Paragraph Number
Page
Number
3-2.
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-3
3-3.
Explanation of Columns. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-4
3-4.
Troubleshooting Symptom Index . . . . . . . . . . . . . . . . . . . . . .
3-4
Table 3-1.
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-6
3-2.
GENERAL.
NOTE
Refer to TM 5-3805-264-14&P for M917A1 and M917A1 W/
MCS dump body troubleshooting.
a.
This section provides information for identifying and correcting mal-
functions which may develop while operating the M915 Family of Vehicles.
b.
The Troubleshooting Symptom index in paragraph 3-4 lists common
malfunctions which may occur and refers you to the proper page in Table 3-1 for a
troubleshooting procedure.
C.
If you are unsure of the location of an item mentioned in trouble-
shooting, refer to paragraph 1-10 or Chapter 2, Section I.
d.
Before performing troubleshooting, read and follow all safety instruc-
tions found in the Warning Summary at the front of this manual.
e.
This section cannot list all malfunctions that may occur, nor all tests
or inspections and corrective actions. If a malfunction is not listed, or is not corrected
by the listed corrective actions, notify your supervisor.
f.
When troubleshooting a malfunction:
(1)
Locate the symptom or symptoms in paragraph 3-4 that best
describe the malfunction.
(2)
Turn to the page in Table 3-1 where the troubleshooting pro-
cedures for the malfunction in question are described. Headings at the top of each
page show how each troubleshooting procedure is organized: MALFUNCTION,
TEST OR INSPECTION (in step number order), and CORRECTIVE ACTION.
(3)
Perform each step in the order listed until the malfunction is
corrected. DO NOT perform any maintenance task unless the troubleshooting proce-
dure tells you to do so.
3-3
