TM 9-2320-303-10
Table 2-1. Preventive Maintenance Checks and
Services (PMCS) for M915A4 (Con't).
Location
Item To
Check/
Not Fully Mission
Item No.
Interval
Service
Procedure
Capable If:
37
After
Trans-
CAUTION
mission
Transmission must not be operating for
extended periods of time until a Hot Check has
verified proper fluid level. Transmission
damage can result from extended operation at
improper fluid level conditions.
With
truck
on
level
ground, start engine and
run
at
idle
with
transmission in Neutral
(N) until transmission oil
temperature
gage
registers 60-120F (16-
49°C). Perform cold oil
check
(Appendix
F).
When temperature has
reached 160-200°F (71-
93°C), perform hot oil
check (Appendix F). Add
transmission
fluid
as
required through fill tube
(47) until level on dipstick
(48) is correct (Appendix
F). Shut down engine.
2-46
