TM 9-2320-303-10
2-26.
OPERATE HEATER AND DEFROSTER.
NOTE
Heater and defroster obtain heat from engine as it runs. If engine is not
running, heat will not be available for these functions.
a.
Start engine (paragraph 2-12) and bring truck to normal operating temperature.
b.
Slide mode control lever (2) to desired position.
c.
Slide temperature control lever (3) to desired temperature range.
d.
Rotate fan switch (1) to adjust fan speed from slower to faster, as desired.
e.
Press FRESH/RECIRC air button (4) to desired setting.
2-27.
PREPARATION FOR TRANSPORT.
WARNING
· Lifting cables, chains, hooks, and slings used for lifting truck must
be in good condition and of suitable capacity. Failure to follow this
warning may result in injury or death to personnel and damage to
equipment.
· Improper use of lifting equipment and improper attachment of cables
to vehicle can result in serious personnel injury and equipment
damage. Observe all standard rules of safety.
a.
To lift vehicle, attach suitable lifting device to lifting shackles. Lift vehicle slowly
and have observers watch for any signs of cable failure, unusual load shifts, and obstructions.
b.
During transport, secure vehicle by attaching cables to tiedown points.
2-82
