TM 9-2320-302-34
0122 00-3
ILLUSTRATED LIST OF MANUFACTURED ITEMS - CONTINUED
0122 00
FABRICATED TOOLS - CONTINUED
(5)
Tack weld coupling to cover plate. Remove cover plate from air compressor or drive and finish welding
coupling to cover plate. Ensure that inside diameter of coupling is free of excess weld.
(6)
Weld two pieces of bar stock to opposite side of cover plate as shown.
3.
Item 3.
a.
Materials.
Rod, 1/2 x 20 x 13 UNC, P/N 1 213X20INLGSTL
b.
Fabrication Notes.
(1)
Cut two 7 in lengths
(2)
Remove all burrs and sharp edges
END OF WORK PACKAGE
