TM 9-2320-302-34
0122 00-2
ILLUSTRATED LIST OF MANUFACTURED ITEMS - CONTINUED
0122 00
FABRICATED TOOLS - CONTINUED
b.
Fabrication Notes.
(1)
Drill and tap sleeve, P/N 166JX, for 1/2 x 13 UNC thread.
(2)
Extend length of thread to 2-1/2 in.
(3)
Install screw in sleeve as shown.
2.
Item 2.
a.
Materials.
(1)
Cover Plate, P/N 5122281
(2)
Coupling, P/N 5141773
(3)
Bar Stock, 3/4 x 1/2 x 4 in (2)
(4)
Tubing, Heavy Wall, 1/2 in Inside Diameter, 3/4 in Long (4)
b.
Fabrication Notes.
(1)
Cut 2 in diameter hole in center of raised portion of cover plate, P/N 5122281.
(2)
Cut 7/16 in from end of coupling, P/N 5141773.
(3)
Weld four tube sections onto raised side of cover plate, centered on four bolt holes as shown.
(4)
Place shim(s) and 7/8 in section of coupling in hub of either air compressor or air compressor drive. Install
cover plate using two bolts to secure it to air compressor or drive. Ensure that coupling contacts cover
plate.
