TM 9-2320-302-34
0110 00-1
REAR WINDOW REPLACEMENT
0110 00
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Gloves (Item 41, WP 0126 00)
Materials/Parts
Compound, sealing (Item 14, WP 0125 00)
Detergent (Item 19, WP 0125 00)
Personnel Required
Two
REMOVAL
WARNING
Wear protective gloves when handling glass. Failure to do so could result in injury to personnel.
NOTE
If removing rear window glass only, perform steps 1 through 3. If removing rear window glass and seal, per-
form steps 1 through 5.
1.
If rear window glass (1) is cracked due to any cause other than being hit by a flying object, mark rubber extrusion (2) at
location of crack.
2.
Using windshield pick, release locking strip (3) from rubber extrusion (2).
CAUTION
When handling glass, be careful not to nick or splinter edges. Chipped edges could cause cracking later.
3.
Apply pressure to one edge of rear window glass (1) from inside of cab (4). Using windshield pick, lift and remove rear
window glass out of rubber extrusion (2).
4.
Remove rubber extrusion (2) from cab (4).
3
4
2
1
4
2
1
