TM 9-2320-302-34
0109 00-5
WINDSHIELD REPLACEMENT - CONTINUED
0109 00
INSTALLATION
WARNING
Wear protective gloves when handling glass. Failure to do so could result in injury to personnel.
CAUTION
•
When handling windshield glass, be careful not to nick or splinter edges of glass. Chipped edges could
cause cracking later.
•
Do not use windshield sealant. Windshield sealant compounds are not needed and, if applied unevenly,
can cause leaks resulting in water damage.
NOTE
•
Manufacturer’s ID number must be at lower center corner of windshield glass when installed.
•
If installing windshield glass only, perform steps 1 through 7. If installing seal or windshield glass and
seal, perform steps 8 through 23.
•
Steps 1 through 7 are the same for each windshield glass.
1.
Lubricate window channel of seal (2) with soap and water solution.
2.
Slide windshield glass (1) into window channel of seal (2) as far as it will go without forcing.
3.
Stretch seal (2) around outside of windshield glass (1) and install windshield glass in window channel of seal.
4.
Using windshield pick, alternate between top and bottom of mounting flanges of cab (4) to work seal (2) over mounting
flange.
5.
With assistant pushing lightly on outside of windshield glass (1), finish working seal (2) over mounting flange of cab
(4).
6.
Finish sealing windshield glass (1) and seal (2) by gently pushing all the way around outside edge.
1
2
