TM 9-2320-302-34
0104 00-6
CAB REPLACEMENT - CONTINUED
0104 00
INSTALLATION - CONTINUED
5.
Remove sling and hoist from cab assembly (6).
6.
Swing three radiator support rods (5) into place and install two washers (4), bolts (3), washers (2), and nuts (1).
7.
Install Collision Warning System (CWS) wiring harness (WP 0066 00).
8.
Install cab anti-lock brake system (ABS) wiring harness (TM 9-2320-302-20).
9.
Install anti-lock brake system (ABS) fuse and relay panel (TM 9-2320-302-20).
10.
Install anti-lock brake system (ABS) electronic control unit (TM 9-2320-302-20).
11.
Install air tubes (TM 9-2320-302-20).
12.
Install chassis wiring harness (TM 9-2320-302-20).
13.
Install cab overhead wiring harness (TM 9-2320-302-20).
14.
Install brake pedal (TM 9-2320-302-20).
15.
Install steering column support bracket (TM 9-2320-302-20).
16.
Install electronic throttle (TM 9-2320-302-20).
17.
Install cab liners (TM 9-2320-302-20).
18.
Install interior grabhandle (TM 9-2320-302-20).
19.
Install sunvisors (TM 9-2320-302-20).
20.
Install head liners (TM 9-2320-302-20).
21.
Install arctic heater (TM 9-2320-302-20).
22.
Install transmission shift control (TM 9-2320-302-20).
23.
Install air horn and valve (TM 9-2320-302-20).
24.
Install beacon warning light bracket (TM 9-2320-302-20).
25.
Install cab air ducts (WP 0111 00).
26.
Install floor mats (TM 9-2320-302-20).
27.
Install radio mounting bracket (TM 9-2320-302-20).
28.
Install windshield (WP 0109 00).
29.
Install rear window (WP 0110 00).
1,2,3,4
5
1,2,3,4
5
