TM 9-2320-302-34
0104 00-4
CAB REPLACEMENT - CONTINUED
0104 00
REMOVAL - CONTINUED
6.
Remove two lock nuts (18), washers (19), screws (20), washers (21), and resilient mounts (22) from rear cab mount
(23). Discard lock nuts.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
CAUTION
Lift cab assembly slowly and check for parts that may still be connected to cab and vehicle structure. Failure
to do so may result in damage to equipment.
7.
Remove cab assembly (6) from frame structure.
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
20
19
18
19
18
22
22
21