TM 9-2320-302-34
0010 00-1
POWER PACK REPLACEMENT
0010 00
THIS WORK PACKAGE COVERS
Removal, Power Pack Separation, Power Pack Assembly, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Barring tool, engine (Item 8, WP 0126 00)
Lift, transmission (Item 75, WP 0126 00)
Spreader, sling (Item 120, WP 0126 00)
Wrench, torque, 15-75 lb-ft (Item 138, WP 0126 00)
Wrench, torque, 50-250 lb-ft (Item 139, WP 0126 00)
Materials/Parts
Clamp, seal (P/N KYX00-5833)
Nut, self-locking (P/N MS51922-33)
Nut, self-locking (P/N MS51922-49) (26)
Nut, self-locking (P/N MS51922-57) (2)
Washer, lock (P/N 103323) (12)
Washer, lock (P/N 20930-78423) (2)
Washer, lock (P/N 78328) (2)
Washer, lock (P/N MS35333-42)
Straps, tiedown (Item 34, WP 0125 00)
Tags, marker (Item 35, WP 0125 00)
Personnel Required
Two
Equipment Condition
Engine oil drained (TM 9-2320-302-10)
Air system drained (TM 9-2320-302-10)
Transmission tunnel access cover removed (TM 9-
2320-302-20)
Hood removed (TM 9-2320-302-20)
Fan impeller and shroud removed (TM 9-2320-302-
20)
Air intake tubes, hoses, and clamps removed (TM 9-
2320-302-20)
Air cleaner, pre-cleaner, and duct assembly removed
(TM 9-2320-302-20)
Alternator/air conditioner belt removed (TM 9-2320-
302-20)
Alternator and alternator adjusting rod removed (TM
9-2320-302-20)
Fender extensions removed (TM 9-2320-302-20)
Oil sampling valves removed (TM 9-2320-302-20)
Driveline disconnected (TM 9-2320-302-20)
Air conditioner compressor removed (WP 0117 00)
Transmission oil cooler lines disconnected (TM 9-
2320-302-20)
Transmission wiring harness disconnected (TM 9-
2320-302-20)
Transmission oil fill tube removed (TM 9-2320-302-
20)
Transmission rear mount removed (WP 0070 00)
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
