TM 9-2320-302-34
0082 00-4
REAR-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0082 00
DISASSEMBLY - CONTINUED
CAUTION
To prevent damage to adjusting rings, do not hit adjusting rings with hammer or use hammer and drift pin to
loosen rings.
9.
Remove four cap screws (7), washers (8), two bearing caps (4 and 5), and two adjusting rings (9).
10.
Attach lifting device to ring gear subassembly (10).
NOTE
Ring gear and assembled parts must be tilted to clear casting inside carrier.
11.
Remove ring gear subassembly (10) and two bearing cups (11).
12.
Place ring gear subassembly (10) on clean work surface and remove lifting device.
4
9
5
7,8
11
10
