TM 9-2320-302-34
0080 00-34
FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0080 00
ASSEMBLY - CONTINUED
93.
Install wood block between ring gear (2) and differential carrier (1) to prevent ring gear from rotating.
NOTE
Rotate input shaft in both directions to ensure bearings are correctly installed.
94.
Install seven cap screws (10) and hand tighten.
95.
Measure gap between bearing cage (41) and differential carrier (1) at four equally spaced places on bearing cage. Note
measurements.
96.
Add four measurements obtained in step 95 and divide by four to get average. Add 0.005 in (0.13 mm) to determine
thickness of shim pack to be installed.
1
2
10
41
1
