TM 9-2320-302-34
0077 00-1
FRONT STEERING KNUCKLE REPLACEMENT
0077 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Dial indicator set (Item 29, WP 0126 00)
Driver, bushing (Item 33, WP 0126 00)
Jack, hydraulic (Item 73, WP 0126 00)
Press, arbor (Item 90, WP 0126 00)
Wrench, torque, 15-75 lb-ft (Item 138, WP 0126 00)
Materials/Parts
Bushing (P/N 1225-W-985) (2)
Gasket (P/N 3208-M-1027) (2)
Seal assembly (P/N A-1205-B-1432) (2)
Materials/Parts - Continued
Seal assembly (P/N A-1205-X-1428) (2)
Shim (P/N 2203-K-3001)
Shim (P/N 2203-L-3002)
Tags, marker (Item 35, WP 0125 00)
References
TM 9-2320-302-10
Equipment Condition
Tie rod removed (WP 0074 00)
Front cross tube arm removed (WP 0075 00)
Front steering arm removed (WP 0076 00)
NOTE
Procedure is same for both steering knuckles.
REMOVAL
1.
If damaged, remove two lubrication fittings (1).
2.
Remove six cap screws (2), flat washers (3), two caps (4), gaskets (5), and seal assemblies (6). Discard gaskets and seal
assemblies.
3.
Remove two nuts (7).
7
1
6
5
4
3
2
9
6
5
4
3
2
1
7
